Upavon Foam Cutters FAQs
Q: How do I stop my Gunville and Big Game Foam Cutters blunting.
A: Avoid cutting directly onto a hard surface, either use a rubber mat or another peice of foam. Alternatively drill through the block horizontal to the work surface rather than downward onto it.
Q: Why are my smaller Gunville Foam Cutters not cutting as smoothly as the larger sizes.
A: For best results when using the smaller cutters, push through the foam much slower to prevent compression and acheive a smoother cut. Maintain a fast drill speed but really take your time and allow the cutter to do the work.
Q: Do i need to lunbricate my Gunville and Big Game Foam Cutters?
A: Sometimes the larger sizes can get hot, although lubrication isn't essential it is recommended for the Big Game cutters.
Q: How do I lubricate my Gunville and Big Game Foam Cutters?
A: A 50/50 split solution of detergent and water or silicone spray acheive best results. Simply apply a small quantity to the tip of the cutter.
Q: Can I sharpen my Gunville and Big Game Foam Cutters?
A: Yes of course. They are manufactured with tool grade stainless steel and can either be sharpened on a smooth grinding stone or fitted to a drill and rotated against a fine file or whetstone at a 20 degree angle.
Q: I ordered my items yesterday have they been despatched?
A: You will receive a despatch notification via email once your order is manifested (please check your junk folder), please allow for up to 2 working days handling time for all orders.